I/O Connectors; Vga Connector; Table 47. Vga Connector Pin-Out (J7A1) - Intel S3420GPLC - Server Board Motherboard Specification

Intel® Server Board S3420GP TPS
Color State
Green ~1 Hz blink
Amber ~1 Hz blink
Amber Solid on
Off N/A
Notes:
1. The BIOS detects these conditions and sends a Set Fault Indication command to the Integrated BMC to provide
the contribution to the system status LED.
2. Support for upper non-critical limit is not provided in the default SDR configuration. However, if a user does
enable this threshold in the SDR, then the system status LED should behave as described.
There is no precedence or lock-out mechanism for the control sources. When a new request
arrives, all previous requests are terminated. For example, if the chassis ID LED is blinking and
the chassis ID button is pressed, then the chassis ID LED changes to solid on. If the button is
pressed again with no intervening commands, the chassis ID LED turns off.
7.5

I/O Connectors

7.5.1

VGA Connector

The following table details the pin-out definition of the VGA connector (J7A1).
Pin
1
2
Revision 2.4
Criticality
Degraded System degraded:







Non-critical Non-fatal alarm – system is likely to fail:






Critical, non- Fatal alarm – system has failed or shutdown:
recoverable





Not ready AC power off, if no degraded, non-critical, critical, or non-recoverable
conditions exist.

Table 47. VGA Connector Pin-out (J7A1)

Signal Name
V_IO_R_CONN
V_IO_G_CONN
Intel order number E65697-010
Connector/Header Locations and Pin-outs
Description
Non-critical temperature threshold asserted.
Non-critical voltage threshold asserted.
Non-critical fan threshold asserted.
Fan redundancy lost, sufficient system cooling maintained.
This does not apply to non-redundant systems.
Power supply predictive failure.
Power supply redundancy lost. This does not apply to non-
redundant systems.
Correctable errors over a threshold of 10 and migrating to a
spare DIMM (memory sparing). This indicates the user no
longer has spared DIMMs indicating a redundancy lost
condition. Corresponding DIMM LED should light up.
CATERR asserted.
Critical temperature threshold asserted.
Critical voltage threshold asserted.
Critical fan threshold asserted.
VRD hot asserted.
SMI Timeout asserted.
Thermtrip asserted.
Non-recoverable temperature threshold asserted.
Non-recoverable voltage threshold asserted.
Power fault/Power Control Failure.
Fan redundancy lost, insufficient system cooling. This does
not apply to non-redundant systems.
Description
Red (analog color signal R)
Green (analog color signal G)
1
81