Intel S3420GPLC - Server Board Motherboard Specification page 87

Intel® Server Board S3420GP TPS
 IPMI command (set System Boot options command)
 Int15 AX=DA209
Choosing Load User Defaults from the Exit page of the BIOS Setup loads user set

defaults instead of the BIOS factory defaults.
The recommended steps to load the BIOS defaults are:
1. Power down the system (Do not remove AC power).
2. Move the Clear CMOS jumper from pins 1-2 to pins 2-3.
3. Move the Clear CMOS jumper from pins 2-3 to pins 1-2.
4. Power up the system.
Revision 2.4
Intel order number E65697-010
BIOS User Interface
75