Figure 33. Setup Utility - Delete Boot Option Screen Display - Intel S3420GPLC - Server Board Motherboard Specification

Intel® Server Board S3420GP TPS
Setup Item
BEV Device Order
Add New Boot Option
Delete Boot Option
EFI Optimized Boot
Boot Option Retry
If all types of bootable devices are installed in the system, the default boot order is:
1. CD/DVD-ROM
2. Floppy Disk Drive
3. Hard Disk Drive
4. PXE Network Device
5. BEV (Boot Entry Vector) Device
6. EFI Shell and EFI Boot paths
6.3.2.6.1 Delete Boot Option Screen
The Delete Boot Option screen allows the user to remove an EFI boot option from the boot
order.
To access this screen from the Main screen, select Boot Options > Delete Boot Options.

Delete Boot Option
Delete Boot Option
Figure 33. Setup Utility – Delete Boot Option Screen Display
Revision 2.4
Options
this group.
Set the order of the legacy devices in
this group.
Add a new EFI boot option to the boot
order.
Remove an EFI boot option from the
boot order.
Enabled If enabled, the BIOS only loads
modules required for booting EFI-
Disabled
aware Operating Systems.
Enabled If enabled, this continually retries non-
EFI-based boot options without
Disabled
waiting for user input.
Intel order number E65697-010
Help Text
Boot Options
Select one to Delete/Internal EFI Shell
BIOS User Interface
Comments
these devices are available
in the system.
Visible when one or more of
these devices are available
in the system.
This option is only visible if
an EFI bootable device is
available to the system (for
example, a USB drive).
If the EFI shell is deleted,
you can restore it by setting
CMOS defaults (F9).

71