Chassis Feature Set For Intel® Compute Module Hns7200Apr; Back Panel Feature Identification; Figure 3. Intel® Server Board S7200Ap Rear Connectors - Intel S7200AP System Integration And Service Manual

1.1.5 Chassis Feature Set for Intel® Compute Module HNS7200APR
The following table lists a brief description of the 2U H2000-G Chassis Product Family features
Feature
Dimensions (2U)
Node Support
Power Supply
System Cooling
PCIe support
Storage
System SKUs
Note: Intel® Compute Module HNS7200APR is not supported in Intel® Server Chassis H2312XXLR2 and
H2216XXLR2
For additional details on chassis features, refer to the Intel® Server Chassis H2000G Product Family TPS.

1.2 Back Panel Feature Identification

The Intel® Compute Module HNS7200AP product family has the following board rear connector placement
and features.
Label
A
C
E
G
438mm x 86.9mm x 771/733mm
17.24" width x 3.42 length x 30.35/28.86" height
Intel® Compute Module options:
HNS7200APR (up to four)
2 x 2130W AC CRPS
3 dual rotor 40 x 56 mm fixed fans per node
Two low profile PCIe cards on riser 1 and 2
4 x 2.5" SATA drive Note: 2.5" SATA HDD installed in the 3.5" Drive Carrier
Bridge Board Options:
(1) 6G SATA only RAID 0, 1, 10 SW RAID ESRT2
Supported for H2204XXLRE chassis only
Description
USB 3.0 Port 1
NIC port 1 (RJ45)
POST Code LEDs (8 LEDs)
Status LED
Figure 3. Intel® Server Board S7200AP Rear Connectors
Description
Label Description
B USB 3.0 Port 2
D NIC port 2 (RJ45)
F ID LED