Show Mem - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

show mem

Description Displays information about memory activity.
Authority None
Syntax
show mem [count]
Operands
[count]
The number of seconds for which to display memory information. If you omit [count], the value 1
is used. Displayed memory values are in 1K block units.
NOTE:
be interrupted. Therefore, avoid using large values for [count].
Examples The following is an example of the show mem command:
8/20q FC Switch #> show mem
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd
1 0
Filesystem space in use: 41138/53188 KB (77%)
This operand will display memory activity updates until [count] is reached–it cannot
free buff cache
0 334464 55932 18728
si so bi
0 0 1
8/20q Fibre Channel Switch command line interface guide 251
bo in cs us sy id wa
0 401 57 1 2 97 0