show interface
Description Displays the status of the active network interfaces.
Authority None
Syntax
show interface
Examples The following is an example of the show interface command:
8/20q FC Switch #> show interface
eth0
lo
Link encap:Ethernet
inet addr:10.20.116.140
UP BROADCAST RUNNING MULTICAST
RX packets:437828742 errors:0 dropped:0 overruns:0 frame:0
TX packets:14061 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:945491469 (901.6 MiB)
Interrupt:60
Link encap:Local Loopback
inet addr:127.0.0.1
UP LOOPBACK RUNNING
RX packets:1407 errors:0 dropped:0 overruns:0 frame:0
TX packets:1407 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:101932 (99.5 KiB)
HWaddr 00:C0:DD:0D:53:E7
Bcast:10.20.116.255
MTU:1500
TX bytes:6897189 (6.5 MiB)
Mask:255.0.0.0
MTU:16436
Metric:1
TX bytes:101932 (99.5 KiB)
8/20q Fibre Channel Switch command line interface guide 203
Mask:255.255.255.0
Metric:1