Service Parts Disassembly
Exit Solenoid (PL 1.1.16)
7-48
1.
Remove the Right Cover (page 7-6).
2.
Remove the Left Cover (page 7-7).
3.
Remove the Top Cover (page 7-10).
4.
Disconnect connector CN10 from the Main Board.
5.
Remove 3 screws securing the solenoid to the printer.
6.
Remove the solenoid assembly.
Note
There is a resistor attached by the upper right hand screw. When
reassembling the printer, ensure the resistor is in place.
s3600-056
Phaser 3600 Printer Service Manual