Chapter 9: Configuring The Cisco Spa500S Attendant Console - Cisco 501G Administration Manual

Configuring the Cisco SPA500S Attendant
Console
NOTE
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
The Cisco SPA500S is a 32-button attendant console for the Cisco SPA500 Series
IP Phones. This section applies only to Cisco SPA500 Series IP Phones with Cisco
SPA500S attendant console attachments.
The Cisco SPA500S cannot be used with a SPA525G if the SPA525G is part of a
Cisco Unified Communications 500 Series for Small Business system.
The Cisco SPA500S connects to the phone with the attachment arm provided (not
shown). It obtains power directly from the phone and does not require a separate
power supply. Two Cisco SPA500S units can be attached to a single phone to
monitor a total of 64 separate lines.
For more information about installing and configuring the Cisco SPA500S with a
Cisco SPA9000 system, see the
Configuration Guide
.
This chapter contains the following sections:
• Configuring the SPA9000 for the Cisco SPA500S, page 165
• Configuring the BroadSoft Server for the Cisco SPA500S, page 165
• Configuring the Asterisk Server for the Cisco SPA500S, page 166
• Configuring the Cisco SPA500S, page 167
• Unit/Key Configuration Scripts, page 168
• Attendant Console Parameters, page 172
• Monitoring the Cisco SPA500S, page 173
Cisco SPA9000 Voice System Installation and
9
162