Configuring Product Identification; Configure Product Identification Tab View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

4. If the product is offline, set the product online as follows:
a. Choose Operations from the navigation panel. The Operations page
displays.
b. Click the Online State tab, then click Set Online. The message Your
operations changes have been successfully activated
displays.

Configuring Product Identification

Perform this procedure to configure the HP product's name, description, location, and
contact person. The Name, Location, and Contact variables configured here
correspond respectively to the SNMP variables sysName, sysLocation, and
sysContact. These variables are used by SNMP management workstations when
obtaining data from managed Edge Switches or Directors. To configure identification:
1. Choose Configure from the navigation panel. Choose the Switch or Director tab,
as appropriate. The Switch or Director tab displays with the Identification tab
view (Figure
Figure 2–2: Configure product Identification tab view
a. Type a name of 24 alphanumeric characters or less in the Name field. Each
product should be configured with a unique name.
embedded web server user guide
2–2).
Configuring the Product
2–5