Installing Feature Keys - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Product
Table 2–1: User Rights Levels (Continued)
Functionality
Operations: Maintenance Product
Info
Operations: Maintenance
Firmware Upgrade
Operations: Feature
Enablement/Installation
Help

Installing Feature Keys

Perform this procedure to install one or more of the following optional features:
• OSMS — This feature allows open systems host control of the product.
• Flexport — A Flexport switch is delivered at a discount with only a portion of the
switch's ports enabled. When additional port capacity is required, the remaining
ports are enabled (in eight-port increments) through purchase of this feature.
• SANtegrity — This feature enhances security in SANs, which is valuable in
SANs that contain a large or heterogeneous group of fabrics and attached devices.
After purchasing a feature, obtain the required feature key from the website to which
the feature documentation directs you. A feature key is an alphanumeric string
consisting of both uppercase and lowercase characters. The total number of characters
may vary depending on keys and serial number. The feature key is case sensitive and
must be entered exactly, including dashes.
Feature keys use a format similar to the following:
XxXx-XXxX-xxXX-xX.
NOTE: You must be logged in with Administrator-level rights to install feature keys.
NOTE: With firmware 03.00.00 or earlier, the product must be offline before a feature can be
enabled. Also, if the new feature key removes existing functionality, the product must be offline
during this process. See
2–22
Administrator
Setting Product Online or Offline on page 6-3
Rights
Available
Available
Available
Available
for instructions.
embedded web server user guide
Operator
Rights
Unavailable
Unavailable
Unavailable
Available