•
Switch Priority — Priority value of the switch. Values can be Default, Principal,
and Never Principal.
•
Interop Mode — Interoperability mode of the fabric. Values can be Homogenous
Fabric and Open Fabric 1.0. (This field is not valid if the product's Operation
Mode is S/390.)
Viewing Fabric Directors and Switches
To view information about the HP high availability fabric Directors and Switches on a
menu, perform the following procedure:
1. Choose View from the navigation panel.
2. Choose the Fabric tab and the Products tab. The Products tab view displays
(Figure
4–6).
NOTE: The page may take some time to display. If the message Attempting to Collect
Data displays in a product cell, you may want to refresh the image to load data that has been
collected. Click the Refresh icon at the top right of the window.
Figure 4–6: Fabric tab with Products tab view
embedded web server user guide
Viewing Product and Fabric Data
4–13