Configuring Identification Information For Directors And Edge Switches; Hafm: Configure Call Home Event Notification Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

3. Select Maintenance > Configure Call Home Event Notification.
Figure 29: HAFM: Configure Call Home Event Notification dialog box
4. Place a check mark in the Enable Call Home Event Notification option.

Configuring Identification Information for Directors and Edge Switches

This procedure describes how to configure identification information for each
Director and Edge Switch that is managed by the HAFM server.
Repeat this procedure for each Director or Edge Switch you want to configure for
call-home event notification.
Note:
you must first add them using the HAFM application. Refer to the appropriate
installation guide for your Director or Edge Switch for more information.
Complete the following steps for each Director or Edge Switch managed using
HAFM:
1. From the HAFM main window, double-click on the icon for the device.
2. On the menu bar, select Configure >Identification. The Configure
HAFM Server for Windows 2000 Installation Guide
The HAFM: Configure Call Home Event Notification dialog box displays,
as shown in Figure 29.
This enables the call-home function for the HAFM server, as well as for all
Directors and Edge Switches that have also been enabled for call-home
notification.
In order for Directors and Edge Switches to be managed by the HAFM server,
The Hardware View for the device is displayed.
Identification dialog box displays, as shown in
HAFM Server Setup and Configuration
Figure 30.
55