Configuring Edge Switch Identification - HP 316095-B21 Installation Manual

To set the Edge Switch online:
1. Open HAFM.
The Products view is displayed.
2. Double-click the appropriate Edge Switch icon.
The Hardware view for the selected Edge Switch is displayed.
3. Select Maintenance > Set Online State.
If the Edge Switch is offline, the Set Online State dialog box is displayed, indicating the status is
offline.
4. Click Set Online.
A Warning dialog box is displayed, indicating status is online.
5. Click OK.
Online appears in the Status table.
To set the Edge Switch offline:
1. Notify the customer that the Edge Switch is going offline.
2. Open HAFM.
The Products view is displayed.
3. Select the appropriate Edge Switch icon.
The Hardware view for the selected Edge Switch is displayed.
4. Select Maintenance > Set Online State.
If the Edge Switch is online, the Set Online State dialog box is displayed, indicating the status is
Online.
5. Click Set Offline.
A Warning dialog box is displayed, indicating the Edge Switch will be set offline.
6. Click OK.

Configuring Edge Switch identification

Perform this procedure to configure the Edge Switch name, description, location, and contact person
for the HAFM application. The information is displayed in multiple dialog boxes throughout the
application. In addition, the Name, Location, and Contact variables configured at the
Configure Identification dialog box correspond respectively to the SNMP variables sysName,
sysLocation, and sysContact. These variables are used by SNMP management workstations
when obtaining data from managed switches.
To configure the Edge Switch identification:
1. At the Hardware view for the selected Edge Switch, select Configure > Identification.
48 Using HAFM to configure the Edge Switch