Configuring, Adding, Or Deleting Zones; Configuring Zones - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring, Adding, or Deleting Zones

Perform this procedure to configure, change, add, or delete zones. A zone is a group of
devices that can access each other through port-to-port connections. Devices in the
same zone can recognize and communicate with each other; devices in different zones
cannot.
CAUTION: If, in your business practices, zoning tasks are performed using both the
Command Line Interface (CLI) and EWS, you risk potential conflicts in the
configuration and functionality could be lost.
To configure zones:
1. Choose Configure from the navigation panel.
2. At the Configure page, choose the Zoning tab and the Zones tab. The Zones tab
view displays as shown in
Figure 3–3: Configuring zones
3. To configure a zone, first add the zone name to the product configuration. The
following naming conventions apply to zones and zone sets:
embedded web server user guide
Figure 3–3.

Configuring Zones

3–11