HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 129

Message
Error 235:
Unrecognized
Command
Error 236: Ambiguous
Command
Error 237: Invalid
Zoning Database
Error 238: Invalid
Feature Key
Error 239: Fabric
binding entry not found
embedded web server user guide
Description
Cannot recognize the
command and cannot
perform the help '?'
command as requested.
Cannot recognize the
command issued.
There was an unidentifiable
problem in the local zone
set work area.
The feature key entered is
invalid.
The user requested to
remove a fabric binding
entry that is not in the
pending fabric membership
list.
Error Messages
Action
The entered command is
misspelled or the prompt
is not positioned at the
right place. For the
appropriate syntax, see
the section of the manual
that corresponds to the
attempted command.
The command cannot be
interpreted because a
unique match cannot be
identified. For the
appropriate syntax, see
the section of the manual
that corresponds to the
attempted command.
Enter the complete
command and re-submit.
Verify all parameters are
entered correctly and
re-submit. Otherwise, the
pending zone set should
be cleared and
reconstructed.
Verify that the feature key
was entered correctly
and re-submit. Contact
your service
representative with
further difficulties.
Verify that the correct
entry (both WWN and
Domain ID) is being
requested for removal
from the list and
re-submit the request.
A–21