Configuring Network Information; Configuring Network Parameters Tab View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Product
b. Click the Online State tab, then click Set Online. The message Your
operations changes have been successfully activated
displays.

Configuring Network Information

Verify the type of LAN installation with the customer's network administrator. If one
HP product is installed on a dedicated LAN, network information (IP address, subnet
mask, and gateway address) does not require change.
If multiple HP products are installed or a public LAN segment is used, network
information must be changed to conform to the customer's LAN addressing scheme.
Perform the following steps to change a product's IP address, subnet mask, or gateway
address.
1. Choose Configure from the navigation panel.
2. Click the Switch or Director tab, then click the Network tab to display the
Network tab view
Figure 2–6: Configuring network parameters tab view
a. At the IP Address field, type the new value specified by the customer's
network administrator (default is 10.1.1.10).
2–12
(Figure 2–6).
embedded web server user guide