HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 16

Introduction
— Parameters for product management through Simple Network Management
Protocol (SNMP), the Command Line Interface (CLI), the Open System
Management Server (OSMS) feature, or the Fibre Connection (FICON)
management server (FMS) feature.
NOTE: The Edge Switch 2/24 does not support out-of-band management through FMS.
However, the Edge Switch 2/24 does support transmission of FICON frames.
— Zones and zone sets.
— User rights (administrator and operator).
• Monitor ports and port statistics, and display the event log and node list.
• Perform product operations and maintenance tasks, including:
— Enable unit beaconing, set the product online or offline, and perform a
configuration reset.
— Enable port beaconing, perform port diagnostics, and reset ports.
— Retrieve dump files and retrieve product information files.
— Install optional feature keys.
— Configure product Internet Protocol (IP) addresses, names, and SNMP
settings.
— Install new versions of product firmware.
— Manage user access to features.
— Control product ports on an individual basis.
— Troubleshoot problems using event log and error status indicators.
Administrators and operators can access real-time information about the
product and fabric.
The EWS interface can be opened from a standard web browser running Netscape
Navigator 4.6 or higher or Microsoft Internet Explorer 4.0 or higher. At the web
browser, the user enters the IP address of the product as the Internet uniform resource
locator (URL). When prompted at a login screen, the user enters a user name and
password.
NOTE: The default user name is Administrator and the default password is password. The
user name and password are case-sensitive.
1–2 embedded web server user guide