HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 58

Configuring Zones
• All names must be unique and may not differ by case only. For example,
zone-1 and Zone-1 are both valid individually, but are not considered unique.
• The first character of a zone set name must be a letter
(A through Z or a through z).
• A zone set name cannot contain spaces.
• Valid characters are alphanumerics and the caret ( ^ ),
hyphen ( - ), underscore ( _ ), or dollar ( $ ) symbols.
• A zone set name can have a maximum of 64 characters.
4. Type the zone name and click Add New Zone. After the name is validated, the
new zone name (Zone-1) and an associated Delete button display at the bottom of
the page. Note the following:
• Save and activate the zone — Changes to a zone or zoning configuration are
not saved and activated on the product until saved as part of a zone set. Go to
Configuring Zone Sets on page 3-14
• Delete all zones — To delete all configured zones and zone members, click
Delete All Zones. A confirmation dialog box displays. Click OK to delete all
zones.
• Delete a single zone — To delete a single zone and its zone members, click
the Delete button adjacent to the zone name. A confirmation dialog box
displays. Click OK to delete the zone.
• Display more zones — If a zone set contains more than 64 zones, the Display
More Zones link activates to display subsequent pages. In addition, the
Display Previous Zones link activates on subsequent displayed pages.
5. To add devices (members) to the zone, click the zone name (Zone-1). The Modify
Zone tab view displays
• Rename the zone — To rename a configured zone, type the new name in the
Zone field and click Rename Zone. After the name is validated, the zone
name is changed.
3–12
to perform this function.
(Figure 3–4 on page 3-13).
embedded web server user guide