HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 119

Message
Error 91: E_Port Type
Configured
Error 92: Not Allowed
While Port Is Unblocked
Error 93: Not Allowed
While FICON MS Is
Installed
Error 94: Invalid
Feature Combination
Error 99: Preferred
Domain ID Cannot Be
Zero
Error 101: Command
Not Supported on This
Product
Error 102: Switch Not
Operational
Error 115: Invalid
Switch Speed
Error 116: Switch Not
Capable of 2 Gb/sec
embedded web server user guide
Description
Ports are not allowed to be
configured as E_Ports in
S/390 mode.
The port must be blocked to
complete this request.
This request cannot be
completed because FICON
Management Server is
installed.
The features requested
cannot be installed at the
same time on one Director
or Switch.
This product cannot be
configured to have a
preferred domain ID equal
to zero (0).
This product does not
support the requested
command.
The request cannot be
completed because the
switch is not operational.
The request cannot be
completed because the
switch is not capable of
operating at the configured
speed.
The request cannot be
completed because the
switch is not capable of
operating at 2 Gbps.
Error Messages
Action
Configure the port as
either a fport or gport
and re-submit the
command.
Block the port and
re-submit the command.
This operation is not
supported. No action
necessary.
Contact your sales
representative.
Ensure that the ID is
expressed as an integer
in the range 1–31 and
re-submit.
Command not
supported. No action
necessary.
Consult the
installation/service
manual and contact your
service representative.
Consult the
installation/service
manual to determine the
speed capabilities of your
product.
Consult the
installation/service
manual to determine the
speed capabilities of your
product.
A–11