HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 124

Error Messages
Message
Error 155: Cannot
Remove Active
Member From List
Error 156: Cannot
Disable Fabric Binding
while Switch is Online
Error 201: Change
Authorization Request
Failed
Error 202: Invalid
Change Authorization
ID
A–16
Description
This member cannot be
removed from the fabric
security list because it is
currently logged in.
The switch must be offline
before Fabric Binding can
be deactivated.
The switch did not accept
the request to make a
change to NVRAM.
The switch will not accept a
change request from this
particular client.
Action
Fabric security rules
prohibit any device or
switch from being
isolated from the fabric
via a membership list
change. If it is truly the
intention of the user to
remove the device in
question from the
membership list, then
there are several
approaches to take. This
request may be
completed most
non-disruptively by
blocking the port (or
physically removing the
device from the managed
switch) to which this
device is attached and
re-submitting the
request.
Deactivating fabric
binding is disruptive to
Fabric operations. Set
the switch offline before
deactivating this feature.
Be sure all parameters
have been entered
correctly and re-submit.
Contact your service
representative with
further problems.
Be sure all parameters
have been entered
correctly and re-submit.
Contact your service
representative with
further problems.
embedded web server user guide