HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 127

Message
Error 222: Invalid
SNMP Community
Index
Error 223: Unknown
Error
Error 224: Invalid
Argument
Error 225: Argument
Does Not Contain All
USASCII Characters
Error 226: Argument Is
Too Long
Error 227: Invalid
SNMP Community
Name
Error 228: Invalid Write
Authorization Argument
embedded web server user guide
Description
The value entered for the
SNMP community index is
invalid.
The switch did not accept
the request
One or more parameters
are invalid for this
command.
Non-USASCII characters.
One or more parameters
are invalid for this
command.
The value entered for the
SNMP community name is
invalid
The write authorization
parameter does not contain
a valid value.
Error Messages
Action
The SNMP community
index must be an integer
in the range 1–6. Make
the appropriate changes
and re-submit the
command.
Contact your service
representative.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
The community name
must not exceed 32
characters in length.
Duplicate community
names are allowed, but
corresponding write
authorizations must
match. Enter an
appropriate SNMP
community name and
re-submit.
Parameters must be
typed exactly to
specification to be
recognized correctly.
A–19