Error Event Code Categories
Error Event Codes define event categories; the categories and events vary by product.
Below is a list of event codes:
•
1xx-system events
•
2xx-power supply events
•
3xx-fan events
•
4xx-control processor card events
•
5xx-port or universal port module card events
•
6xx-serial crossbar assembly (SBAR) events
•
8xx-thermal incident events
For detailed information on event codes and isolating problems from events and
record event data, see the product installation and service manual.
NOTE: In addition to the event log, another method to obtain operation information about the
status of the product is from the Fabric Tab. See
There are two options available that you can use to clear either event logs or the
system error light. These options are described below.
Clearing Event Log Entries
NOTE: Before clearing the event logs, make sure the logs are not needed for troubleshooting.
Once the event log is cleared, the data cannot be retrieved.
To access this option, choose Monitor and choose the Log tab. Choose Clear Event
Log Entries to clear the event logs for the product. A message displays stating that the
operation has been performed successfully.
Clearing the System (Product) Error Light
To access this option, choose Monitor, and then choose the Log tab. Click Clear
System Error Light to clear the ERR (error) LED on the product's front panel. (The
ERR LED remains illuminated as long as an event like a FRU failure is active.) A
message displays stating that the operation has been performed successfully.
embedded web server user guide
Chapter 4, Viewing Product and Fabric
Monitoring Products
Data.
5–9