HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 128

Error Messages
Message
Error 229: Invalid UDP
Port Number
Error 230: Invalid WWN
Error 231: Invalid Port
number
Error 232: Invalid
Domain ID
Error 233: Invalid
Member
Error 234: Invalid
Command
A–20
Description
The udpPortNum parameter
does not contain a valid
value.
The wwn parameter does
not contain a valid value.
The portNum parameter
does not contain a valid
value.
The domainID parameter
does not contain a valid
value.
The zone member added is
not valid.
The cannot associate an
action with the submitted
command. The command
may be misspelled, required
parameters may be missing,
or the request may not be
applicable.
Action
Parameters must be
typed exactly to
specification to be
recognized correctly by
the CLI.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual
that corresponds to the
attempted command.
Consult the
documentation for the
command to be sure this
command was entered
correctly, all parameters
are valid and present,
and that the syntax is
correct.
embedded web server user guide