Configuring Date And Time - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Product
If the product is installed on a public LAN, it is recommended that the name
reflect the product's Ethernet network domain name system (DNS) host name. For
example, if the DNS host name is edgeswitch224.hp.com, the name
entered in this dialog box should be edgeswitch224.
b. Type a product description of 255 alphanumeric characters or less in the
Description field.
c. Type the product's physical location (255 alphanumeric characters or less) in
the Location field.
d. Type the name of a contact person (255 alphanumeric characters or less) in the
Contact field.
2. Click Activate to save and activate the changes. The message Your changes
to the identification configuration have been
successfully activated displays.

Configuring Date and Time

Perform this procedure to configure the effective date and time for the product. To set
the date and time:
1. Choose Configure from the navigation panel. Choose the Switch or Director tab,
as appropriate. Click the Date/Time tab to display the Date/Time tab view
(Figure 2–3 on page
2–6
2-7).
embedded web server user guide