Tr Mapping Manager Dialog Box; Transparent Route Dialog Box - HP StorageWorks 8/20q User Manual

The Transparent Route dialog box
selected from the Transparent Routes data window. The state of the route (Active or Inactive) is shown, and
Port WWN, TR Port WWN, and Status fields are displayed for both sides of the route. Device A does not
necessarily correspond to the HP H-Series Fibre Channel Switch side of the route because the end points of
the route could be in any order.
Figure 22

Transparent Route dialog box

TR Mapping Manager dialog box

NOTE: The Merge Auto Save option in the Config Zoning dialog box must be selected before you can
open the TR Mapping Manager dialog box. For more information, see
To view the current inter-fabric routes:
1. Select Fabric > TR Mapping Manager to open the TR Mapping Manager dialog box
2. Select a TR mapping member in the TR Mapping list for which to display information.
Figure 23

TR Mapping Manager dialog box

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide
(Figure 22) displays detailed information about the transparent route you
"Merge Auto Save" (page 54).
(Figure 23).
45