Connecting Usb Devices; Connecting Video Devices By Using A Vga Cable (Select Products Only) - HP USB-C Travel Dock User Manual

Connecting USB devices

The dock has two USB ports: one USB 3.0 port and one USB 2.0 port on the rear panel. Use the USB ports to
connect optional external USB devices, such as a keyboard and mouse.
NOTE: Be sure that the external device is compliant with the dock power specifications. Using a
noncompliant device might disable the port to which the device is attached. To reset the port, see
Troubleshooting on page
Connecting video devices by using a VGA cable (select products
only)
NOTE: To connect a VGA video device to your dock, you need an VGA cable, purchased separately.
To see the computer screen image on an external VGA monitor or projected for a presentation, connect a
monitor or projector to the dock's VGA port.
NOTE: The dock supports one display device at a time. If an HDMI display device is connected to the dock,
then the dock will not support a VGA display device. You must disconnect the HDMI display device from the
dock before connecting a VGA display device.
Connect the VGA cable from the monitor or projector to the VGA port on the dock as shown.
▲
NOTE: The dock does not support viewing Blu-ray or other protected content on a display device connected
to the external monitor port on the dock.
10.
Connecting USB devices 7