Replacing The Fan Board; Fan Assembly Rotated Away From Its Base - Intel SRKA4 - Server Platform - 0 MB RAM Product Manual

Replacing the Fan Board

1. Remove the fan board assembly. See "Removing a Fan Board Assembly" on page 62.
2. Remove the screws securing the base from the upper portion of the fan bay assembly. Keep
them in a safe place. You need them later in the procedure.
3. Rotate upper portion of the assembly away from the base. The upper portion is noted by "A"
in Figure 31. The base is noted by "B".
4. Remove the plastic rug. The plastic rug is noted by "C" in Figure 31.
5. Remove the screws that secure the fan board to the assembly.
6. Replace the fan board and attach the screws.
7. Place the plastic rug back into the assembly. The orientation of the rug is important. For the
correct orientation, see Figure 31 on page 64.
8. Rotate the assembly back towards its base.
9. Attach the screws that secure the base to the rest of the fan assembly.
10. Install the fan board assembly. See "Installing a Fan Board Assembly" on page 63.
64
A
Figure 31. Fan Assembly Rotated Away From its Base
C
B
OM09957
SRKA4/ISP4400 Server System Product Guide