Hot-Plug Pci Add-In Boards; Pci Hot-Plug Retention Mechanism; Rear Retention Latch - Intel SRKA4 - Server Platform - 0 MB RAM Product Manual

Hot-plug PCI Add-in Boards

The SRKA4 MP Server System supports six hot-plug PCI add-in boards. From the back of the
server system, the six slots are shown in "Rear Panel I/O Ports and Features" on page 19.
Each hot-plug PCI add-in board is held in place by a PCI Hot-plug (PHP) Retention mechanism.
A. Green and amber LEDs.
B. Press here on the inside of the chassis and then rotate to release the PCI board.
C. PCI Hot-plug Retention mechanism from the outside of the chassis.
D. HW push-button.
For full-length add-in boards only, the rear of the board is held in place by a rear retention latch.
A.
B.
C. Rear retention latch in the closed position.
Removing and Installing User Serviceable Components
A
B
Figure 11. PCI Hot-plug Retention Mechanism
B
A
Figure 12. Rear Retention Latch
Hot-plug PCI add-in board.
Close up of rear retention latch in the closed position.
C D
OM09943
C
OM09944
29