Ipv6 Multi Lan - Cisco QuickVPN - PC Administration Manual

Networking
Configuring IPv6 Addressing
STEP 3
STEP 4
STEP 1
STEP 2
Cisco SA 500 Series Security Appliances Administration Guide
Enter the following information:
• Start IPv6 Address: Enter the first address in the range of addresses for this
pool.
• End IPv6 Address: Enter the final address in the range of addresses for this
pool.
• IPv6 Prefix Length: Enter the number of characters in the IPv6 prefix.
The IPv6 network (subnet) is identified by the prefix, which consists of the
initial bits of the address. All hosts in the network have the identical initial
bits for the IPv6 address. The number of common initial bits in the
addresses is set by the prefix length field.
Click Apply to save your settings, or click Reset to revert to the saved settings.

IPv6 Multi LAN

You can use this page to configure an IPv6 LAN alias address.
Click Networking on the menu bar, and then click IPv6 > IPv6 Multi LAN in the
navigation tree.
The IPv6 Multi LAN page appears. Any existing alias addresses are listed in the
Available Multi IPv6 Addresses table.
Click Add to add a new alias address.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries in the table, check the box
at the left side of the heading row.
After you click Add or Edit, the IPv6 Multi LAN Configuration page appears.
3
98