Netbios Filters For Lan Traffic; Success Window Support; Technical Support Window Support - Cisco 800 Design Manual

CFG File Modification

NetBios Filters for LAN Traffic

When using an ISP-only configuration to a single destination, with or without the firewall filters, the
preferred configuration is to prevent NetBIOS traffic from needlessly bringing up the ISDN line. This
prevents broadcast WAN and LAN messages from wasting money. The flag syntax is as follows:
[Remote Network Interface Settings]
SetNetBiosFilterOnISP
[Local LAN Ethernet0 Settings]
SetNetBiosFilterOnE0=
If a flag value is set to 1 (default), the NetBIOS filter is enabled. The IOS access-list commands added
to the current dialer access list will be as follows:
access-list <<number>> deny udp any any eq netbios-ns
access-list <<number>> deny udp any any eq netbios-dgm
access-list <<number>> deny tcp any any eq 139
If a flag value is set to 0 or blank, the NetBIOS filter is disabled.

Success Window Support

The Success window appears when the Service Selection feature is enabled. This window provides the
end user with the option to test the connections and to display technical support information.
The flag syntax and default parameters are as follows:
[Service Selection]
ISPSuccessText1= Your file has been successfully created.
ISPSuccessText2= Setup another router using Cisco Fast Step
ISPSuccessText3= Change the setup on this router by rerunning Cisco Fast Step Setup and
selecting the router named <<fill in name here>>
ISPSuccessText4= Setup routers for others using a Cisco Fast Step setup file (Press the
Help button for more information)
The Success window displays the text strings indicated by the ISPSuccessTextX flags, where X is line 1
through 4. (There is no on-screen help topic for this window.)

Technical Support Window Support

The technical support information displayed in the Technical Support window is customized by
modifying the text string for the related flag. For example, the following entry displays a telephone
number:
[TechSupportInfoDetail]
Title=
PhoneDescription1="ISP Technical Support"
Phone1=408.408.4081
Cisco 800 Fast Step Software Design Guide
2-6
Chapter 2 CFG File Development
OL-10373-02