Cisco QuickVPN - PC Administration Manual page 51

Sa 500 series security appliances administration guide
Hide thumbs Also See for QuickVPN - PC:
Table of Contents

Advertisement

Networking
Configuring the WAN Connection
STEP 1
STEP 2
STEP 3
Cisco SA 500 Series Security Appliances Administration Guide
Use the account information provided by your ISP to complete the fields on this
page.
Click Networking on the menu bar, and then click WAN > IPv4 Config in the
navigation tree.
—OR—From the Getting Started (Basic) page, under WAN & LAN Connectivity,
click WAN settings.
The IPv4 WAN Configuration page appears.
In the ISP Configuration area, check the Internet Connection Require a Login box
if your ISP requires a login every time you connect to the Internet.
If you checked the box, continue to
Connection Type area.
If you did not check the box, continue to
Internet (IP) Address area and Dynamic Name System (DNS) Servers area.
If your Internet connection requires a login, enter the settings in ISP Connection
Type area:
ISP Connection Type: Choose the connection type, as specified by your
service provider: PPTP, PPPoE, or L2TP. Then complete all fields that are
highlighted with white backgrounds.
PPPoE Profile Name: Choose a PPPoE profile. To manage the profiles in the
drop-down list, see
User Name: The user name that is required to log in
Password: The password that is required to log in
Secret: Enter the secret phrase to log into the server (if applicable).
Connectivity Type: Choose one of the following options:
-
Keep Connected: The connection is always on, regardless of the level of
activity. Choose this option if you pay a flat fee for your Internet service.
-
Idle Time: The security appliance disconnects from the Internet after a
specified period of inactivity (Idle Time). If you choose this option, also
enter the Idle Time in minutes. Choose this option if your ISP fees are
based on the time that you spend online.
My IP Address: Enter the IP address assigned to you by the ISP.
Server IP Address: Enter the IP address of the PPTP, PPPoE, or other server.
Step 3
Step 4
Creating PPPoE Profiles, page
to complete the fields in the ISP
to complete the fields in the
55.
3
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents