Networking
Configuring the WAN Connection
Cisco SA 500 Series Security Appliances Administration Guide
You can use the pages in the Networking module to configure your Internet
connection, LAN, DMZ, VLAN, routing, and related features.
•
Configuring the WAN Connection, page 50
•
Configuring the LAN, page 56
•
Configuring the Optional WAN, page 62
•
Configuring a DMZ, page 70
•
VLAN Configuration, page 77
•
Routing, page 83
•
Port Management, page 86
•
Bandwidth Profiles, page 88
•
Dynamic DNS, page 91
•
Configuring IPv6 Addressing, page 92
•
802.1p, page 107
By default, your security appliance is configured to receive a public IP address
from your ISP automatically through DHCP. Depending on the requirements of your
ISP, you may need to modify these settings to ensure Internet connectivity. For
example, your ISP may have assigned a static IP address or may require a login.
If you need to configure IPv6 addressing, see
NOTE
page
92.
Configuring IPv6 Addressing,
3
50