Cisco QuickVPN - PC Administration Manual page 160

Configuring VPN
Configuring an IPSec VPN Tunnel for Remote Access with a VPN Client
STEP 1
STEP 2
STEP 3
Cisco SA 500 Series Security Appliances Administration Guide
Click VPN on the menu bar, and then click IPSec > IPSec Users in the navigation
tree.
The IPSec Users page appears. Any existing users are listed in the List of IPSec
Users table.
Click Add to add a user.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries, check the box in the first
column of the table heading.
After you click Add or Edit, the IPSec User Configuration page appears.
Enter the following information:
• User Name: Enter a unique identifier for the XAUTH user.
• Remote Peer Type: Choose one of the following options:
- Standard IPsec (XAuth)
- Cisco QuickVPN
X-Auth is an IPSec standard that extends the authentication in native
NOTE
IPSec to provide user credentials. XAUTH can be used when
additional client security is required with IPSec clients such as
Greenbow. QuickVPN is a propriety Cisco/Linksys client which uses
user authentication but the implementation is specific only to Quick
VPN. This option should be selected when the clients use QuickVPN
Client.
• Allow user to change password?: If you chose Cisco QuickVPN for the
Remote Peer Type, you can check this box to allow the user to change the
password.
• Password: Enter an alphanumeric password for this user.
• Confirm Password: Re-enter the characters that you entered in the
Password field.
8
160