Networking
Configuring the WAN Connection
STEP 1
STEP 2
NOTE
Cisco SA 500 Series Security Appliances Administration Guide
Viewing the WAN Status
You can check the WAN status, renew the connection, or release the connection.
Click Networking on the menu bar, and then click WAN > WAN Status.
The WAN Status page appears. This page displays the following types of
information about the dedicated WAN and the optional WAN (if applicable):
•
Connection time
•
Connection type: Dynamic IP (DHCP) or Static IP
•
Connection state: Connected or Disconnected
•
WAN state: Up or Down
•
Lease duration
•
IP address
•
Subnet mask
•
Gateway
•
DNS server
If the WAN is configured using DHCP, you can use buttons on the WAN Status page
to renew or release the connection.
•
Click Renew to renew the connection.
•
Click Release to release the connection.
If you are having problems with your WAN connection, see the
Connection, page 220
in
Appendix A, "Trouble Shooting."
3
Internet
54