Specifying The Network Resources For Ssl Vpn - Cisco QuickVPN - PC Administration Manual

Configuring VPN
Configuring SSL VPN for Browser-Based Remote Access
STEP 6
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
• Defined Resources: Choose the services for a particular policy. This option
is available only for policies that are applied to a Network Resource.
• Permission: Choose either Permit or Deny for this policy.
Click Apply to save your settings, or click Reset to revert to the saved settings.
Next steps:
Enable Remote Management (RMON), if you have not done so previously. If RMON
is disabled, SSL VPN access is blocked. See
page 215.

Specifying the Network Resources for SSL VPN

Network resources are services or groups of LAN IP addresses that are used to
easily create and configure SSL VPN policies. This shortcut saves time when
creating similar policies for multiple remote SSL VPN users.
Click VPN on the menu bar, and then click SSL VPN Server > Resources in the
navigation tree.
The Resources page appears.
To add a network resource, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries, check the box in the first
column of the table heading.
Enter the following information:
• Resource Name: Enter a unique name to identify this resource.
• Service: Choose one of the supported SSL VPN services to associate with
this resource.
Click Apply to save your settings, or click Reset to revert to the saved settings.
RMON (Remote Management),
8
181