Cisco QuickVPN - PC Administration Manual page 17

Getting Started
Installation
STEP 4
STEP 5
STEP 6
STEP 7
Cisco SA 500 Series Security Appliances Administration Guide
For network devices, connect an Ethernet network cable from the network device
to one of the dedicated LAN ports on the back panel.
For a UC 500, connect an Ethernet network cable from the WAN port of the UC 500
to an available LAN port of the security appliance.
For details about configuring the UC 500 and the security appliance to work
NOTE
together, see the SA 500 Series Security Appliances Administration Guide
on Cisco.com. See the documentation links in the "Where to Go From
Here" section of this guide.
Power on the security appliance.
Power on the connected devices. Each LED lights to show an active connection.
A sample configuration is illustrated below.
Congratulations! The installation of the security appliance is complete.
1
17