Dmz Dhcp Leased Clients - Cisco QuickVPN - PC Administration Manual

Networking
Configuring a DMZ
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
Click Networking on the menu bar, and then click Optional Port > DMZ Reserved
IPs in the navigation tree.
—OR—From the Getting Started (Advanced) page, under DMZ Port, click
Configure DMZ DHCP Reserved IPs (Optional).
The DMZ Reserved IPs page appears. Any existing DMZ reserved IP addresses
appear in the Available DHCP Assigned IPs (DMZ) table.
The reserved IPs need to be outside the pool of the DHCP addresses that
NOTE
the DMZ DHCP server assigns dynamically.
Click Add.
Other options: Click Edit to edit an entry. To delete an entry, check the box,
NOTE
and then click Delete. To select all entries in the table, check the box at the
left side of the heading row.
After you click Add or Edit, the DMZ Reserved IPs Configuration page appears.
Enter the IP Address and the MAC Address.
Click Apply to save your settings, or click Reset to revert to the saved settings.

DMZ DHCP Leased Clients

This page displays a list of the DHCP-assigned IP addresses and hardware
addresses of the DMZ clients.
Click Networking on the menu bar, and then click Optional Port > DMZ DHCP
Clients in the navigation tree.
3
76