Cisco QuickVPN - PC Administration Manual page 190

Configuring VPN
VeriSign™ Identity Protection configuration
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
Enter the following information:
• Credential Id: Enter the 6-digit alphanumeric number, which is typically
found on the back of the physical token. Each credential identifier must be
unique and must not be added if it is already present in the token
configuration table.
• User Name: Choose the user to associate with the token number. Each
credential identifier can be associated with only one user. After the user has
been associated with a credential, the same user cannot be associated with
a different credential. Only available users are shown in the user list.
Click Apply to save your settings, or click Reset to revert to the saved settings.
8
190