Managing User Credentials For Verisign Service - Cisco QuickVPN - PC Administration Manual

Configuring VPN
VeriSign™ Identity Protection configuration
STEP 3
NOTE
STEP 1
STEP 2
Cisco SA 500 Series Security Appliances Administration Guide
• VIP Production: Choose this option if you have purchased VeriSign service.
The service will use VIP production servers to authenticate your users.
c. Click Apply to save your settings, or click Reset to revert to the saved settings.
In the Upload Certificate area, complete the following tasks:
a. Certificate File: Click Browse, and then find your VeriSign certificate (RA) file.
a. Password for the certificate file: Enter the password that was provided to you
along with the certificate (RA) file. The password encrypts the private key
provided in the certificate and is required to decrypt and use it.
b. Click Upload to upload the certificate.

Managing User Credentials for VeriSign Service

Use this page to associate VeriSign tokens with your users.
Your users must be configured in Administration first. See
Click VPN on the menu bar, and then click VeriSign ID Protection > Credential
Management in the navigation tree.
The VeriSign Credential Management page appears.
To add a credential, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries, check the box in the first
column of the table heading.
After you click Add or Edit, the VeriSign Credential Configuration page appears.
8
Users, page 191.
189