Configuring Snmp System Info - Cisco QuickVPN - PC Administration Manual

Network Management
SNMP
NOTE
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco SA 500 Series Security Appliances Administration Guide
Click the Edit button to edit an entry. To delete an entry, check the box and then click
Delete. To select all entries, check the box in the first column of the table heading.
The SNMP Configuration page appears.
Enter the following information:
• IP Address: Enter the IP Address of the SNMP manager or trap agent.
• Subnet Mask: Enter the network mask used to determine the list of allowed
SNMP managers.
• Port: Enter the SNMP trap port of the IP address to which the trap messages
will be sent.
Click Apply to save your settings, or click Reset to revert to the saved settings.

Configuring SNMP System Info

You can use this page to configure the MIB (Management Information Base) fields.
Click Network Management on the menu bar, and then click SNMP > SNMP
System Info in the navigation tree.
The SNMP System Info page appears.
Enter the following information:
• SysContact: The name of the contact person for this security appliance.
• SysLocation: The physical location of the security appliance.
• SysName: A name given for easy identification of the security appliance.
Click Apply to save your settings, or click Reset to revert to the saved settings.
10
218