Cisco QuickVPN - PC Administration Manual page 178

Configuring VPN
Configuring SSL VPN for Browser-Based Remote Access
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
Click Administration on the menu bar, and then click Users > Users in the
navigation tree. The List of Users table appears.
The User page appears. The default Administrator and Guest users appear in the
List of Users table, along with any new users that you add.
To add a user, click Add.
This procedure explains how to add SSL VPN users. For more information
NOTE
about the User page, see
The User Configuration page appears.
Enter the following information:
• User Name: Enter a unique identifier for the user. It can include any
alphanumeric characters.
• First Name: Enter the user's first name.
• Last Name: Enter the user's last name.
• User Type: Choose SSL VPN User.
• Select Group: Choose SSLVPN.
• Password: Enter a password that contains alphanumeric, '—' or '_'
characters.
• Confirm Password: Enter the password again.
• Idle Timeout: Enter the time in minutes that the user can be inactive before
the session is disconnected. Enter any value from 0 to 999. The timeout value
for the individual user has precedence over the timeout for the group. If the
user's timeout value is set to 0, the group timeout setting applies.
Every user is added as a local user with password, and when the user
NOTE
is assigned to an external authentication mechanism based on the
group, certain attributes such as the local password are ignored.
Click Apply to save your settings, or click Reset to revert to the saved settings.
Adding or Editing User Settings, page
8
194.
178