Adding Or Editing User Login Policies - Cisco QuickVPN - PC Administration Manual

Administration
Users
STEP 4
STEP 1
Cisco SA 500 Series Security Appliances Administration Guide
• If you are updating a user's settings, complete the following fields:
- Check to Edit Password: Check this box to enable the password fields.
- Enter Your Password: Enter your password, as a security check before
you can change a password.
- New Password: Enter a password that contains alphanumeric, '—' or '_'
characters.
- Confirm Password: Enter the password again.
• Idle Timeout: Enter the time in minutes that the user can be inactive before
the session is disconnected. Enter any value from 0 to 999. The timeout value
for the individual user has precedence over the timeout for the group. If you
want to ensure that the group's timeout settings are used, set this value to 0.
Every user is added as a local user with password, and when the user
NOTE
is assigned to an external authentication mechanism based on the
group, certain attributes such as the local password are ignored.
Click Apply to save your settings, or click Reset to revert to the saved settings.

Adding or Editing User Login Policies

To add or edit user login policies, click Administration on the menu bar, and then
click Users > Users in the navigation tree.
The Users page appears.
You cannot configure these settings for the system default users, only for the
NOTE
users that you add.
9
195