Ssl Vpn Status - Cisco QuickVPN - PC Administration Manual

Status
VPN Status
Cisco SA 500 Series Security Appliances Administration Guide

SSL VPN Status

This page displays the current statistics for the SSL VPN Tunnel connections. You
can use the buttons on the page to either start or stop connections. To open this
page, click Status on the menu bar, and then click VPN Status > SSL VPN Status
in the navigation tree.
• User Name: The username of the logged in user.
• IP Address: The Internet IP address from where tunnel establishment was
initiated.
The following are the tunnel specific fields:
• Local ppp interface: This is the name of ppp interface on the router
associated to sslvpn tunnel.
• Peer PPP Interface IP: It is the IP address assigned to ppp interface at the
remote client side from where the tunnel is established.
• Tx Packets: The number of packets associated with the tunnel transferred
by the remote client.
• Tx Dropped Packets: The number of packets associated with the tunnel
dropped while transfering, by the remote client.
• Tx Bytes (KB): The total volume of sent traffic (in Kilobytes) associated with
the tunnel.
• Rx Packets: The number of packets associated with the tunnel received by
the remote client.
• Rx Dropped Packets: The number of packets associated with the tunnel
dropped while receiving, by the remote client.
• Rx Bytes (KB): The total volume of received traffic (in Kilobytes) associated
with the tunnel.
• Action: Click Disconnect to terminate an active user's session and hence
the associated SSLVPN-Tunnel(if any).
If the tunnel is not established by the user, the tunnel specific fields
NOTE
will have no values.
2
44