Download  Print this page

Dhcp Leased Clients; Configuring The Optional Port As A Lan Port - Cisco QuickVPN - PC Administration Manual

Sa 500 series security appliances administration guide.
Hide thumbs

Advertisement

Networking
Configuring the LAN
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco SA 500 Series Security Appliances Administration Guide
Enter the IP address and the MAC address of the device that you want to add.
Each reserved IP address should be outside the configured DHCP pool
NOTE
addresses.
Click Apply to save your settings, or click Reset to revert to the saved settings.

DHCP Leased Clients

This page displays a list of the DHCP-assigned IP addresses and hardware
addresses of the LAN clients. Click Networking on the menu bar, and then click
LAN > DHCP Leased Clients in the navigation tree.

Configuring the Optional Port as a LAN Port

If you are not planning to configure an optional WAN or a DMZ, you can configure
the Optional port for use as a LAN port.
Click Networking on the menu bar, and then click Optional Port > Optional Port
Mode in the navigation tree.
The Optional Port Mode page appears.
Choose LAN.
Click Apply to save your settings, or click Reset to revert to the saved settings.
3
61

Advertisement

Table of Contents

   Related Manuals for Cisco QuickVPN - PC

Comments to this Manuals

Symbols: 0
Latest comments: