Groups - Cisco QuickVPN - PC Administration Manual

Administration
Users
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide

Groups

Groups are used to create a logical grouping of SSL VPN users that share the
authentication domain, LAN and service access rules, and idle timeout settings.
They are associated to authenticating domains.
Click Administration on the menu bar, and then click Users > Groups in the
navigation tree.
The Groups page appears.
To add a group, click Add in the List of Groups table.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries, check the box in the first
column of the table heading.
After you click Add or Edit, the Groups Configuration page appears.
Enter the following information:
• Group Name: Enter a unique identifier for the group. You can use any
alphanumeric characters.
• Domain: Assign a domain from the drop-down list of authentication
domains.
• Idle Timeout: Enter the number of minutes that a device can be idle before
the session is disconnected.
The group timeout setting is used as the default timeout setting for all
NOTE
users in the group. You can assign a different idle timeout setting to a
user on the Users page. The user settings have precedence over the
settings group settings. See
page 194.
Click Apply to save your settings, or click Reset to revert to the saved settings.
Adding or Editing User Settings,
9
193