Enabling Or Disabling Vlan Support - Cisco QuickVPN - PC Administration Manual

Networking
VLAN Configuration
STEP 1
STEP 2
STEP 3
NOTE
Cisco SA 500 Series Security Appliances Administration Guide
- HTTP Remote Access: disable
- HTTPS Remote Access: disable
• Voice VLAN: The VLAN is enabled with the VLAN ID 100.
- IP Address: 10. 1 . 1 . 1
- IP Address Distribution: DHCP Server
- Start IP Address: 10. 1 . 1 .50
- End IP Address: 10. 1 . 1 .254
- Subnet Mask: 255.255.255.0

Enabling or Disabling VLAN Support

By default, VLAN support is enabled. If you do not want VLANs, you can disable
VLAN support.
Click Networking on the menu bar, and then click VLAN > VLAN Configuration in
the navigation tree.
The VLAN Configuration page appears.
To enable VLAN support, check the Enable VLAN box. To disable VLAN support,
uncheck the box.
Click Apply to save your settings, or click Reset to revert to the saved settings.
Next steps:
Create VLAN IDs. For more information, see Creating VLAN IDs, page
3
79.
78