Cisco QuickVPN - PC Administration Manual page 58

Sa 500 series security appliances administration guide
Hide thumbs Also See for QuickVPN - PC:
Table of Contents

Advertisement

Networking
Configuring the LAN
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
If you want to reserve certain IPs for particular devices, complete this
NOTE
procedure and then configure the reserved IP addresses. See
Reserved IPs, page
-
DHCP Relay: Choose this option to allow the security appliance to use a
DHCP Relay. If you choose this mode, also enter the IP address of the
Relay Gateway.
Domain Name (optional): Enter a name for the domain.
Starting IP Address and Ending IP Address: Enter the range of addresses
in the IP address pool for this security appliance. Any new DHCP client that
joins the LAN is assigned an IP address in this range. The default starting
address is 192. 1 68.75.2. The default ending address is 192. 1 68.75. 1 00. You
can save part of the range for PCs with fixed addresses. These addresses
should be in the same IP address subnet as the LAN IP address of the
security appliance.
Primary DNS Server and Secondary DNS Server (Optional): Optionally,
enter the IP address of the primary DNS server and secondary DNS server
for your service provider.
Primary Tftp Server and Secondary Tftp Server (Optional): Optionally,
enter the IP address of the primary Tftp server and secondary Tftp server
for your service provider.
WINS Server (Optional): Enter the IP address for the WINS server or, if
present in your network, the Windows NetBios server.
Lease Time: Enter the maximum connection time in hours that a dynamic IP
address is "leased" to a network user. When the time elapses, the user is
automatically assigned a new dynamic IP address. The default is 24 hours.
Relay Gateway: If you chose DHCP Relay as the DHCP mode, enter the IP
address of the relay gateway.
In the LAN Proxies section, specify the proxy settings:
Enable DNS Proxy: Check this box to allow the security appliance to act as
a proxy for all DNS requests and to communicate with the DNS servers of the
ISP. When this feature is disabled, all DHCP clients receive the DNS IP
addresses of the ISP.
60.
3
DHCP
58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents