Cisco QuickVPN - PC Administration Manual page 124

Firewall Configuration
Configuring Firewall Rules to Control Inbound and Outbound Traffic
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
For more information about the time settings for your security appliance, see
NOTE
Configuring the Time Settings, page
Click Firewall on the menu bar, and then click Firewall > Schedules.
—OR—From the Getting Started (Advanced) page, under Firewall and NAT Rules,
click Configure Schedules (Optional).
The Firewall Schedules page appears. Any existing schedules appear in the List
of Available Schedules table.
To create a new schedule, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check
NOTE
the box and then click Delete. To select all entries, check the box in the first
column of the table heading. To select all entries, check the box in the first
column of the table heading.
After you click Add or Edit, the Schedules page appears.
Enter the following information:
• Schedule Name: Enter a name for the schedule. The name will appear in the
Select Schedule drop-down list on the Firewall Rule Configuration page.
• Scheduled Days: From the drop-down list, choose All Days or Specific
Days. If you choose Specific Days, also check the days for this schedule.
• Schedule Time of Day: From the drop-down list, choose All Day or Specific
Times. If you choose Specific Times, also enter the Start Time and the End
Time by entering the hour, minute, and AM or PM.
Click Apply to save your settings, or click Reset to revert to the saved settings.
If you are using the Getting Started (Advanced) page, click Getting Started
NOTE
in the menu bar, and then click Advanced in the navigation tree to continue
with the list of configuration tasks under Firewall and NAT Rules.
207.
5
124