Chapter 36
Configuring QoS
Table 36-15
Commands for Displaying Standard QoS Information (continued)
Command
show policy-map [policy-map-name [class
class-map-name]]
show running-config | include rewrite
OL-13018-03
Purpose
Display QoS policy maps, which define classification criteria for
incoming traffic.
Do not use the show policy-map interface privileged
Note
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
Display the DSCP transparency setting.
Cisco IE 3000 Switch Software Configuration Guide
Displaying Standard QoS Information
36-69