Cisco IE-3000-8TC Software Configuration Manual page 295

Chapter 13 Configuring Interface Characteristics
You can also configure a range of interfaces (see the
page 13-6).
To configure a physical interface (port), specify the interface type, module number, and switch port number,
and enter interface configuration mode.
• Type—Fast Ethernet (fastethernet or fa) for 10/100 Mb/s Ethernet, Gigabit Ethernet (gigabitethernet
or gi) for 10/100/1000 Mb/s Ethernet ports, or small form-factor pluggable (SFP) module Gigabit
Ethernet interfaces.
Module number—The module number on the switch. The module number (1 to 3) depends on how
•
the module is connected to the switch or to other modules.
–
–
–
Port number—The physical interface number on the switch. The port numbers for the IE-3000-4TC
•
switch model are 1–4 for the Fast Ethernet ports and 1–2 for the Gigabit Ethernet ports. The port
numbers for the IE-3000-8TC switch model are 1–8 for the Fast Ethernet ports and 1–2 for the
Gigabit Ethernet ports.
numbers.
Table 13-1
Switch Model
IE-3000-4TC switch
IE-3000-8TC switch
IEM-3000-8TM expansion module
(connected to the switch)
IEM-3000-8TM expansion module
(connected to another module)
You can identify physical interfaces by looking at the switch. You can also use the show privileged
EXEC commands to display information about a specific interface or all the interfaces. The remainder
of this chapter primarily provides physical interface configuration procedures.
OL-13018-03
The module number for the IE-3000-4TC and IE-3000-8TC switches is 1.
The module number for a module that is directly connected to the switch is 2.
The module number for a module that is connected to another module is 3.
Table 13-1
Switch Interface Numbers
"Configuring a Range of Interfaces" section on
shows the switch and module combinations and the interface
Module
Number Interface Numbering Scheme
1 Fast Ethernet1/1, Fast Ethernet1/2, Fast
Ethernet1/3, Fast Ethernet1/4, Gigabit Ethernet1/1,
and Gigabit Ethernet1/2
1 Fast Ethernet1/1, Fast Ethernet1/2, Fast
Ethernet1/3, Fast Ethernet1/4, Fast Ethernet1/5,
Fast Ethernet1/6, Fast Ethernet1/7, Fast
Ethernet1/8, Gigabit Ethernet1/1, and Gigabit
Ethernet1/2
2 Fast Ethernet2/1, Fast Ethernet2/2, Fast
Ethernet2/3, Fast Ethernet2/4, Fast Ethernet2/5,
Fast Ethernet2/6, Fast Ethernet2/7, and Fast
Ethernet2/8
3 Fast Ethernet3/1, Fast Ethernet3/2, Fast
Ethernet3/3, Fast Ethernet3/4, Fast Ethernet3/5,
Fast Ethernet3/6, Fast Ethernet3/7, and Fast
Ethernet3/8
Cisco IE 3000 Switch Software Configuration Guide
Using Interface Configuration Mode
13-5